Why your home could be a source of the difficulty.
Your house may not meet the minimum thickness requirements.
If you haven’t dug under your home or don’t have building drawings that show the thickness of your home’s footing, this one is difficult to tell until our work has begun. If you do have such information, however, please let us know.
At the very least, 18 inches is the recommended depth for the footing of a house. Due to the building standards in place at the time of their construction, many older homes do not have even 18 inches of footing. It sounds a little bit odd, but they do exist.
By preventing further settling, and stabilizing the house, you may reduce the amount of damage and maintenance that will need to be done in the future. We will still implement the proposed solution just as we would if we were going to raise the home; but, after the piers have been erected, all that will be necessary to transfer the weight of the home onto the pier system is to load the weight of the home onto each individual pier.
It may be possible to eliminate some of the sloped floors in the property by slightly lifting the structure of the house, and this may not affect any of the modifications in any way. The lifting merely needs to be done in a very steady and gradual manner from beginning to end. We need to keep an eye on the doors, windows, drywall, and countertops whenever we are lifting something. If we notice that any of these components are being stressed or compromised, we will strongly suggest that you cease.
The other option is to just go ahead and try to lift the house without worrying too much about the potential consequences. This strategy is typically adopted by homeowners who have experience working in the construction business and possess the knowledge and resources necessary to fix issues such as misaligned doors, cracks in the drywall or stucco, or the requirement to reset and adjust cabinetry.
We don’t want to attempt to lift a house if the depth of its footing is less than 18 inches since this indicates that the footing is not nearly as robust as it needs to be and could crack during the lifting operation. Take a sheet of paper and hold it in your hands down its length by the ends. The center of the sheet of paper is sagging. When weight is applied to the piers as part of the lifting process, the footing responds in the same manner as before. If we stabilize it and enable the soil to help support the footing that is in between the piers, the chances of that footing bowing are significantly lower than they would be if we did not stabilize it.
However, we are still able to carry out a raise; the pier spacing would merely need to be reduced from the existing 6-8 feet to anywhere between 3 and 4 feet. Because of this, the footing will be able to be supported throughout the lifting operation, and it will not bow or sag as a result.
The warranty on stabilizing your home is the same as the warranty we provide when we elevate a property, which is a positive aspect of this service. You will still have the ability to transfer the warranty, and you will continue to have the peace of mind that comes with knowing your home will not experience any further movement.
It takes more than just driving piers into the ground and lifting your home to perform Foundation Inspection City Of Industry and repair work because this process is more of a science. Gaining an understanding of the components that make up your home as well as your objectives will make it possible to carry out a project with greater success.
At the end of the day, it is much preferable to have a home that has been stabilized and is not going to move rather than lifting your home and causing more costly damages or compromising your home’s foundation. This is because having a home that has been stabilized and is not going to move will not affect the value of your home. Contact the RLM Retrofit Foundation right away at the number shown on their website; they provide services including foundation examination and repair. When it comes to delivering solutions for foundation recovery, RLM Retrofit Foundation is the market leader and sets the standard for the industry.
